Mold Removal Services

Mold removal is something you can do on your own. But if you think that the problem is extremely serious and you’re having a hard time removing it you can always seek help from a professional. Professionals understand the ideal and best technique to get rid of molds so that they will not spread to your entire household that may lead to further damage.

Nevertheless, if you discovered molds problem in your home and they’re just minimal and you want to save money, then this article can help you.

We will show you how to do mold removal in the right way by DIY or with the help of a professional service provider

Without further ado, let’s get started.

How to Remove Mold

Before you start, make sure that you wear the right gear when removing molds. This’s because molds consist of spores that are considered airborne particles.

Though molds are not dangerous in most cases, there are types that may carry health risks not only for people but for your pets as well. So for safety precautions, you need a pair of gloves, eye protection to protect your eyes from interacting with spores, and an N-95 mask that is readily accessible at supermarkets.

Now that you are geared up, let’s take a look at the methods that you can try to remove molds in your home.

• Kitchen

Dealing with molds in the kitchen is pretty easy unless it’s not too extensive. All you need to do is scrub the infected area with a high-quality cleaning solution. Then make sure to rinse the area properly as some cleaning solutions contain harsh ingredients that may cause contamination.

It’s worth mentioning that there are some ways that you can do to prevent mold development in your kitchen.

1. Improve ventilation by opening the windows
2. When cleaning and cooking make sure to run the hood vent
3. After washing the dishes, remove water from the hard surfaces.
4. Fix leaking faucets immediately
5. Don’t keep serving dishes and tableware when they are still wet to prevent molds from building up in your cabinets.

• Bathroom and Shower

Your bathroom and shower are both susceptible to molds since they get wet all the time. However, molds can be eliminated using many different ways.

A mixture of baking soda and water, commercial cleaning solutions, plain water and soap, and a bleach mixture of one cup laundry bleach for every gallon of water -these are some of the most effective cleaning solutions that you can use to remove molds in the bathroom and shower.

If you’ve decided which solution you’ll use, scrub the area using it. For grouts, you can use a toothbrush to eliminate mold. But if you are cleaning shower walls and other broad surfaces we highly recommend that you use a big brush so that you will be able to finish mold removal more rapidly.

One of the best ways that you can do to prevent mold development in this area is to improve ventilation by opening the windows. What’s more, you can also open the fan when you are cleaning, showering, or even shaving.

Another great way to prevent mold is dry hard surfaces like sinks and walls and most importantly fix any plumbing issues.

• Basement

In the basement of your home mold development may be lasting, that’s because there’s more humidity in this area. Sometimes, there’s only a little flow of air and has poor ventilation. Aside from that, the basement is susceptible to flooding, whether it’s because of extreme weather or leaking sump pumps or pipes.

To remove molds in basements, you can scrub the infected walls with a big brush and cleaning solution for mold removal. However, it’s worth noting that surfaces such as drywall and ceiling tiles should be removed and at the same time replaced.

If your basement has a carpeted floor and it becomes moldy, loosen up the mold by sweeping the carpet. After that, if you can carry your carpet, bring it outside to let it dry. But if it’s too heavy, you can use a high-powered fan to get rid of moisture especially if it’s glued to the flooring.

Though mold development is common in the basement there are things that you can do to prevent it. For example, you can install a dehumidifier. However, if you’re using the basement for laundry check if the dryer vent is exhausting externally.

• Attic

Similar to basements, attics are dark and have a damp atmosphere making them conducive to mold. Fortunately, you can clean your attic as you would do in the basement. Scrub the affected area using a high-quality and safe cleaning solution and a brush. By the way, make sure that the walls don’t have penetrated permeable materials.

Nevertheless, to avoid mold development in attics, the vents should be directed outside of your home instead of ending in the attic. You should also assess the roof to lessen the problems that may contribute to the development of mold in this area of your home. If you are using skylights or vents, make sure they are properly sealed to forbid moisture from entering.

• Wooden Surfaces

For eliminating molds on wooden surfaces such as furniture, wood cabinets, and paneling, a vacuum cleaner that has soft brush attachment is the best tool that you can use. The small areas, on the other hand, can be cleaned with a well-wrung fabric that is dipped into a cleaning solution made with water and dishwasher detergent. Then rinse the wooden surfaces using a water-dampened and clean cloth, make sure to dry them right away using a fan. Also, don’t oversaturate the wood, or else you will end warping and damaging the filmy.

Sometimes, there will be cloudy film formations. If you encounter this scenario, you can use a mineral spirit. Or apply furniture polish to protect the finish and bring back the shine.

• Upholstery

When cleaning upholstery and even mattress, you can begin by cleaning the whole item with a vacuum cleaner. To prevent the collected molds and other particles from escaping make sure to toss the vacuum bag and filter.

If there are remaining stains, you can sponge the area using a clean cloth dampened in one cup of warm water and rubbing alcohol. However, to ensure that this solution will not damage the fabric you can do a spot test. Meaning to say, you can put a small amount on a hidden area and observe if there are unnecessary changes. If there’s any change, don’t continue using the solution. But if nothing changes, then it is safe to use.

When rinsing, you can wipe the surface using a water-dampened sponge. To get rid of the odors, dry the item under the sun for a couple of hours. Or you can simply use fans.

When it comes to killing spores that may stick in thick padding, you can use a disinfectant. But if the upholstery still smells stinky or the stains reappear, we highly recommend that you throw out the item.

• Painted Walls

If the ventilation is very poor, mildew may develop on walls more rapidly. When you see molds on painted walls, immediately mix 3/4 cup of bleach with a gallon of water. Then apply it using a scrub brush with soft bristles. Let the cleaning solution stay for about 15 minutes before you rinsing. Then dry the walls with fan for 30 minutes or until they are completely dry.